Wenling Aogehe Machinery Co., Ltd.

NEWS CENTER

Gear working principle and maintenance common sense

Gear working principle and maintenance common sense

With the continuous growth of China's industry, China's gear industry is also rapidly developing and expanding. Now the gear industry has already become one of the largest industries in my country's machinery industry. However, many customers today do not know much about gears. Today we will learn about the maintenance of the next gear.

17

2022

/

05

Introduction to the knowledge of gear grinding in rack production and processing

Introduction to the knowledge of gear grinding in rack production and processing

For high-precision parts such as racks, its production and processing steps should be more rigorous, and the production and processing technology should also be improved along with the increase in demand.

17

2022

/

05

What is the difference between ground and fine milled racks?

What is the difference between ground and fine milled racks?

First of all, the tooth surface treatment methods used by the grinding rack and the fine milling rack are not the same. The former uses the grinding tooth surface treatment method, and the latter uses the fine milling (milling) tooth surface treatment method.

17

2022

/

05

What are the types of tooth surface processing of rail racks?

What are the types of tooth surface processing of rail racks?

Forming production and processing usually refers to the production and processing of product workpieces by making full use of forming tools. The guide rail rack manufactured in this way has a low degree of rack and can only be used in the natural environment of low-speed movement.

17

2022

/

05

How is the error of the gear caused?

How is the error of the gear caused?

As the main mechanical components in industrial production, racks and pinions are required to have high performance indicators.

17

2022

/

05

Learn about the lower rack

Learn about the lower rack

Rack forging and machining may generate residual stress. If heat treatment is carried out without treatment, it will be superimposed with quenching distortion, and large distortion will occur. Therefore, annealing, normalizing, quenching and tempering, etc. should be used to reduce stress in advance. to address residual stress.

17

2022

/

05

Constant pressure honing and variable pressure honing of racks

Constant pressure honing and variable pressure honing of racks

When single-sided meshing gear honing, mechanical friction device or load hydraulic pump is generally used to apply a certain braking torque to the pressed honing gear, so as to realize single-sided noisy and constant pressure honing with constant pressing tooth pressure.

17

2022

/

05

Analysis of the main reasons for the noise of the rack

Analysis of the main reasons for the noise of the rack

The main reason for the noise of the rack is the sound caused by the mutual impact, friction, and tooth engagement of mechanical equipment. We can all call it noise. If the noise is too loud, it is not a good phenomenon. People cause bad influence, and we control that voice. And greatly reduce the harm of noise.

17

2022

/

05

< 1 2 >

Support hotline:

Tel：13157669722

Fax：0576-86812910

E-mail：2584376085@qq.com

Address: No. 8, Lianyi Road, Ruoheng Town, Wenling City, Taizhou City, Zhejiang Province

Follow us

Follow us

Copyright© 2022 Wenling Aogehe Machinery Co., Ltd. All Rights Reserved.

Powered by 300.cn

京ICP备10002622号-38